Hallo Leute,
Blade2 ist im Anmarsch
ZitatAlles anzeigenImprovements to DV output
- When outputting your project, if you choose Print to tape you don't need to rerender the DV files in your project
- When scrubbing or trimming video clips on the timeline, the video will be output via your Firewire cable to your DV camera or deck and can then be viewed on an external monitor that's hooked to the DV camera /deck
Support for the Panasonic AG-DVX100
1/3" 3-CCD 24P DV Cinema Camera
http://www.panasonic.com/PBDS/subca..._ag-dvx100.html
Edit in 24p or DV NTSC frame rates natively
- you can choose to set the timeline to 24p or DV NTSC
- you can switch between 24p and DV NTSC so that you can output your project to a progressive frame rate and / or DV NTSC
Automatic Reverse Telecine (ART)
- supports 24p and the advanced 24p formats
- if you put a clip that's in 24p format on a 24p timeline it will automatically display 24 frames
- to edit 24p, start a new project in 24p, capture from AG-DVX100 in 24p or 24p advanced format
(the camera shutter captures 24 frames but the camera's electronics adds in 6 extra frames which are recorded to tape meaning that the tapes from the camera can be played back on any DV NTSC camera or deck.)
- add a 24p clip to the timeline and you'll be editing (viewing) the 24p frames only
(the remaining 6 frames are still in the captured file, it's just that if you choose to edit a 24p project then you will only be editing the 24 frames)
Choose to output to:
24p MPEG2
24p uncompressed AVI
24p still images - TGA, SGI, BMP, JPEG, RAW
29.97 fps DV
29.97 fps MPEG2
30 fps still images - TGA, SGI, BMP, JPEG, RAW
Playback in realtime
You can playback a 24p project in realtime from the timeline to the VGA and to the Firewire output
PS: Danke EZ du hast uns mit dem Speed Razor auf die Seite von in-sync gebracht und uns mit der Nase auf auf BLADE gestoßen.
Für AVALON -- das Interface von Blade ist nach Studium des Handbuches völlig frei zu gestalten. Mittels SDK
läst sich das Interface sogar als MAC OSX herstellen.
Der Clou an der Sache, jedes Kommando läst sich als Schalter, oder als Icon in die Blade Timeline einbauen.
GünterN :headbanger
: